High-Quality Old Road Marking Removal Cleaning Equipment
Introduces:
The ultra-high pressure water flow generated by the booster equipment loaded on the light truck is continuously fed into the hand-push washer through the hose, and then sprayed on the road at a high speed. The maximum pressure of the water can reach 300 MPa, which is 3061 kgf/cm². After the washing machine pushed through, the road surface was intact and the painted marking lines on the road were cleaned up after being swept by the high-pressure water flow.
Features of the whole machine:
1. The equipment adopts Cummins brand diesel engine of the United States.
2. The pump adopts high-quality German technology and design, which is efficient and reliable.
3. The connection between the pump and the diesel engine adopts a flexible coupling design with low noise
4. Split type high pressure pump, each alloy-coated plunger has an independent cooling system.
5. The integrated oil cooling system provides a reliable guarantee for the long-term stable operation of the pump
6. Trailer type or truck type installation can be selected by users.
7. The control cabinet is Cummins original, digital display control panel, humanized control interface, and various sensor signal displays.
8. The pressure-sensing diesel engine fuel-saving device adopts American technology. It is a specially designed fuel-saving device with a fuel-saving rate of 20-30%.
Manual Cleaning Cart Features:
1. The manual cleaning cart is equipped with a height adjustment device, which can adjust the height of the rotating head arbitrarily, which is convenient to use.
2. The washing truck is designed with a remote control switch, which can remotely control the switching of high and low pressure working states.
3. The original design of the rotating mechanism can support an extremely high pressure of 1500 bar.
4. The rotating head is driven by a 24V motor and adopts gear transmission, which is much more durable than belt transmission without loss.
5. The maximum cleaning width of the rotating head can reach 200mm, and the cleaning speed is faster.
6. The rotating head is equipped with a circular protective cover, and a dirt suction device can be added to ensure a clean and tidy work site.
Technical Parameters:
Maximum Working Pressure: 1500Bar
Maximum Input Power: 90KW
Plunger Diameter: 18mm
Gear Reduction ratio: 2.76
Equipment Size: 2.7 meters long, 1.7 meters wide, 2 meters high
Maximum Water Consumption: 26L/M
Pump Speed: 525R/M
Stroke: 66mm
Comprehensive Fuel Consumption: 11-14L/M
Load: 2.5 tons
| Type |
Input Speed(min-1) |
1485 |
Pump stroke |
92mm |
| DLS90 |
Pump Speed(min-1) |
280 |
314 |
343 |
469 |
| Plunger Diameter(mm) |
Pressure(Mpa) |
Flow(L/min) |
Power(kw) |
Flow(L/min) |
Power(kw) |
Flow(L/min) |
Power(kw) |
Flow(L/min) |
Power(kw) |
| 30 |
50 |
54.5 |
55 |
59.9 |
75 |
65.5 |
75 |
89.5 |
90 |
| 45 |
23 |
122.8 |
55 |
134.8 |
75 |
147.3 |
75 |
201.4 |
90 |
| 50 |
18 |
151.6 |
55 |
166.5 |
75 |
181.8 |
75 |
248.6 |
90 |
| 56 |
14 |
190.2 |
55 |
208.8 |
75 |
228.1 |
75 |
311.9 |
90 |
| 60 |
12 |
218.3 |
55 |
239.7 |
75 |
261.8 |
75 |
358.0 |
90 |
| 64 |
10 |
248.4 |
55 |
272.7 |
55 |
297.9 |
75 |
407.4 |
90 |
| Type |
Plunger Diameter(mm) |
Flow(L/min) |
Input Speed(min-1) |
Pressure Corresponding To Power(Bar) |
| 90kw |
110kw |
132kw |
| DLS132 |
14 |
20 |
1500 |
2400 |
2800 |
- |
| 16 |
25 |
1500 |
1900 |
2300 |
2700 |
| 18 |
32 |
1500 |
1400 |
1800 |
2100 |
| 20 |
40 |
1500 |
1200 |
1400 |
1700 |
| 22 |
47 |
1500 |
1000 |
1200 |
1400 |
| 24 |
57 |
1500 |
800 |
1000 |
1200 |
| 26 |
67 |
1500 |
700 |
850 |
1000 |
| 28 |
78 |
1500 |
600 |
720 |
900 |
| 30 |
90 |
1500 |
520 |
650 |
800 |
| 32 |
102 |
1500 |
450 |
550 |
700 |
| 34 |
115 |
1500 |
400 |
500 |
600 |
| 36 |
129 |
1500 |
350 |
450 |
550 |
| 38 |
143 |
1500 |
320 |
400 |
500 |
| 40 |
160 |
1500 |
300 |
350 |
450 |
| 42 |
175 |
1500 |
260 |
320 |
400 |
| 44 |
192 |
1500 |
240 |
300 |
350 |
| Type |
Plunger Diameter(mm) |
Flow(L/min) |
Input Speed(min-1) |
Pressure Corresponding To Power(Bar) |
| 160kw |
200kw |
250kw |
300kw |
| DLS300 |
18 |
33 |
1500 |
2400 |
2780 |
- |
- |
| 20 |
41 |
1500 |
1950 |
2430 |
2780 |
- |
| 22 |
50 |
1500 |
1600 |
2000 |
2500 |
- |
| 24 |
60 |
1500 |
1330 |
1666 |
2000 |
2500 |
| 26 |
70 |
1500 |
1140 |
1428 |
1785 |
2100 |
| 28 |
81 |
1500 |
985 |
1234 |
1500 |
1800 |
| 30 |
93 |
1500 |
860 |
1075 |
1350 |
1600 |
| 32 |
106 |
1500 |
755 |
940 |
1150 |
1400 |
| 34 |
120 |
1500 |
666 |
830 |
1040 |
1250 |
| 36 |
134 |
1500 |
595 |
745 |
930 |
1120 |
| 40 |
165 |
1500 |
485 |
600 |
755 |
910 |
| 45 |
210 |
1500 |
380 |
475 |
595 |
710 |
| 50 |
258 |
1500 |
310 |
385 |
480 |
580 |
| 55 |
312 |
1500 |
255 |
320 |
400 |
480 |
| 60 |
372 |
1500 |
215 |
270 |
335 |
400 |
| 65 |
436 |
1500 |
180 |
230 |
285 |
340 |
| 70 |
507 |
1500 |
157 |
197 |
245 |
295 |
| 75 |
582 |
1500 |
137 |
172 |
214 |
255 |
1. Suitable for high-pressure and ultra-high-pressure cleaning pumps, petroleum, chemical, fertilizer process pumps, copper liquid pumps, oil fields, salt mines, liquid carbon dioxide pumps, five sodium slurry pumps, steel plant dephosphorization pumps, rust removal pumps, spunlace Non-woven pump.
2. Assembly method: horizontal, vertical, fixed, mobile.
3. Transmission mode: electric motor, diesel engine, gear box, belt pulley, electromagnetic speed regulation, frequency conversion speed regulation.
4. The technical parameters in the table are used as reference for selection. Each pump is equipped with a safety pressure regulating valve, and the pressure of the pump can be adjusted arbitrarily
5. The flow rate in the selection table is inappropriate. Electromagnetic speed regulation, frequency conversion speed regulation, and plunger diameter can be used to adjust the flow rate to meet the selection requirements.
6. The pump body materials include alloy steel, martensite, austenitic stainless steel, 316, 205L duplex steel.
Audited Supplier 
){kind=link}